MikroTiK With discounts
The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and 80MHz channels. 802.11a/n/ac opens up new possibilities and speeds never possible before. The SXT ac is a new member in our 802.11ac product lineup, currently two models are available — with regular 28 degree antenna, and the SA model with a 90 wide beam - width sector antenna. Also support 802.11a/n standard, Nstreme and Nv2 protocols and are compatible with all legacy RouterBOARD devices. Both devices come with Gigabit Ethernet.
12 834 грн
11 344 грн
Like the previous LHG LTE models, this is a last mile-internet solution for situations when even your phone might not have any signal. The new LHG comes with a cutting-edge Category 18 LTE modem – for the fastest mobile internet no matter where you are. This kit supports speeds up to one Gbps! Due to its large high-gain 17 dBi antenna, LHG LTE18 kit can connect to cell towers in extreme rural locations where nothing else is available. There is a massive heat sink, so you don’t have to worry about overheating. The grid antenna design can withstand harsh, windy weather. And it can be mounted in different ways, including poles and masts.
23 192 грн
17 809 грн
The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.
14 786 грн
12 128 грн
RB5009UPr+S+IN - new version of our popular heavy-duty RB5009 router with PoE-in and PoE-out on all ports. Perfect for small and medium ISPs. 2.5 Gigabit Ethernet & 10 Gigabit SFP+, numerous powering options.
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
564 грн
503 грн
MikroTik SAW30-240-1200GR2A - 24V 1.2A power supply with angled plug. Input voltage - 110/220V; output voltage - 24V, 1.2A.
12 313 грн
10 066 грн
The MikroTik G1270 is a 750 W open frame power supply designed for high-performance networking equipment such as the CRS354-48P-4S+2Q+RM switch. It supports a wide input voltage range of 90–264 V AC and provides dual outputs: 53 V⎓ 13.5 A and 26.5 V⎓ 27 A.
9 841 грн
7 668 грн
The G1070 power supply is a 500W high-performance adapter designed for use with the MikroTik CRS328-24P-4S+RM. It provides stable and reliable power to ensure uninterrupted network operation. With high efficiency and quality components, it guarantees durability and long-term performance.
Hot-swap 54.5V 10.35A 600W power supply for the CRS320-8P-8B-4S+RM PoE++ switch. The switch comes with a single 600W PSU and an expansion slot for a second PSU that can raise the total power output all the way to 1150 Watts, up to 90 Watts per PoE++ port.
MT48-480095-11DG is 48 V, 0.95 A power supply. It's part of our GPEN concept, that provides all the benefits of GPON but utilizes well-proven, simple and inexpensive Ethernet solutions.
24v 1.2A power supply with straight plug. The cable length is 1.5 meters. The power supply is compatible with MikroTik equipment and other devices that are powered by 24V DC voltage.
2 918 грн
2 278 грн
Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices apart or on top of each other.
3 767 грн
1 559 грн
XQ+BC0003-XS+ is a QSFP28 to 4x SFP28 break-out cable. This addition to the MikroTik 100 Gigabit product line allows you to connect multiple 25 Gigabit devices to your CRS504 or CCR2216. With the integrated SFP28 modules, connecting numerous devices becomes as simple as it gets. The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy.
We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications. Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m).
2 070 грн
1 978 грн
A 40/100 Gbps QSFP28 direct attach cable, 1m long. Enables easy direct connectivity between two 100 Gigabit devices. Fairly flexible. Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is one meter long, which should be enough for most setups, but there is also a 3-meter version available. It is fairly flexible – you can keep your devices apart or on top of each other.
The MikroTik 48V2A96W 48V 2A 96W power supply with plug is designed for use with MikroTik products that support 48V output voltage, such as hEX PoE and CRS112-8P-4S-IN.
The MikroTik 48V 1.46A 70W (48POW) power supply is designed to provide equipment manufactured by MikroTiK with a direct current of 48V and a current of 1.46A. The power consumption of the connected device must not exceed 70W.
MikroTik 24HPOW is a powerful 24V 2.5A DC power supply. The device can be used with a Gigabit PoE POE injector to remotely power MikroTik equipment over twisted pair technology using Passive PoE technology.
Mikrotik 18POW - power supply 24 V, 0.8 A, jack 2.1 mm. The power supply is compatible with the entire line of MikroTik RouterBoard routers. It can be used with RBGPOE Gigabit POE Injector.
MikroTik Power Suply 5V, 1A, microUSB for hAP mini, hAP lite, cAP lite MikroTiK 5VPOW
Article:
5VPOW
420 грн
363 грн
MikroTik 5VPOW 5V 1A (microUSB) power adapter is designed for MikroTik hAP mini, hAP lite, cAP lite access points.
5 637 грн
4 080 грн
Hot Swap power supply for CCR1072/2216 and CRS504/CRS518. CCR1072-1G-8S+ and CR2216-1G-12XS-2XQ units are equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over.
2 571 грн
2 038 грн
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003).
U.fl-SMA female pigtail, that can be used to connect your Modem (LTE/LoRa/Wireless card) with U.fl connectors to an external antenna.
Need a wired router that won’t slow you down or drain your budget? The new hEX S is a compact, truly budget-friendly device that does a little bit of everything – and does it fast. Whether you’re building a smart home, running a local lab, or just want a clean, powerful wired setup, this is your new Ethernet essential.