Мережеве обладнання пасивне
The R1 support frame is designed for installing the LEONARDO TDCV 2000A air conditioner. It provides stable positioning and proper load distribution for the unit. The frame is suitable for use in HVAC and engineering systems. It simplifies installation and supports secure equipment placement. Intended for professional applications.
The Uniflair S4 controller is designed for TCP/IP communication with UpCO1m-based systems. It enables remote monitoring and control via a web-based interface. The device provides real-time access to connected equipment parameters. It integrates easily into existing network infrastructures. Suitable for use in engineering and cooling control environments.
9 516 грн
7 058 грн
The ZPAS PWD-4W roof fan unit is designed for ventilating floor-mounted server and telecommunications cabinets. It is equipped with four fans and a built-in thermostat for automatic temperature control. It is installed in the top panel of the cabinet and operates from a 230 V mains supply. The design is compatible with a standard 380 x 380 mm roof opening.
The ZPAS bracket is designed for mounting vertical 19-inch mounting profiles in cabinets with a width of 800 mm. It ensures a standard mounting distance of 19 inches between profiles. It is used as an element of the internal mounting system of cabinets. Depending on the height of the cabinet, two or three brackets are used to install one mounting profile.
3 600 грн
2 897 грн
The ZPAS 19-inch 1U pull-out shelf is designed for installation in server and telecommunications cabinets. Depth adjustment in the range of 450–550 mm allows the shelf to be adapted to different cabinet configurations. Four-point mounting ensures stable fixation and even load distribution. The maximum permissible load of the shelf is 30 kg.
The ZPAS shelf, 19 inches in size and 1U in height, is designed for installation in server and telecommunications cabinets. Depth adjustment in the range of 350–600 mm allows the shelf to be adapted to different installation conditions. Four-point mounting ensures stable fixation on the cabinet mounting profiles. The maximum permissible load is 150 kg.
17 000 грн
13 044 грн
The ZPAS wall cabinet from the Z-BOX series, with a 19-inch format and a height of 10U, is designed for indoor installation of telecommunications and network equipment. The 600x600 mm design ensures compact installation of equipment with access to all components. The front glass doors allow visual inspection without opening the cabinet. The maximum permissible load is 100 kg.
61 850 грн
46 998 грн
The ZPAS SZB IT series cabinet, 19 inches wide and 42U high, is designed for installing server and telecommunications equipment. The 600×1000 mm design allows for the placement of standard depth equipment and cable management. The front glass doors allow visual inspection without opening the cabinet. The maximum load is 1500 kg for stationary installation.
The ZPAS 19-inch 42U rack is designed to house telecommunications and server equipment. The 800х1000 mm design provides space for mounting standard depth equipment and organizing cables. The front glass doors allow you to monitor the installed devices without opening the cabinet. The permissible load of up to 1500 kg is intended for stationary installation.
The APC AR8429 horizontal cable organizer is designed for structured cable management. The integrated brush strip helps maintain proper airflow inside the enclosure. The slim and lightweight design supports efficient space usage. Suitable for various IT and network installations.
3 818 грн
3 514 грн
The DIGITUS 10", 9U SOHO PRO cabinet is designed for organizing network equipment in home and office environments. It features a glass front door and cable entries at the top and bottom. Inside, galvanized 254 mm mounting rails are adjustable in depth. The steel housing up to 1.5 mm thick is finished with a gray powder coating. Assembly follows clear step-by-step instructions.
7 280 грн
6 666 грн
The DIGITUS 19", 12U SOHO PRO cabinet is designed for organizing network equipment in home and office environments. It features a perforated metal front door and cable entries at the top and bottom. Inside, two pairs of 483 mm galvanized mounting rails are adjustable in depth. The steel housing up to 1.5 mm thick is finished with a gray powder coating. Assembly follows clear step-by-step instructions.
4 424 грн
4 080 грн
The DIGITUS 10" SOHO PRO cabinet offers compact installation of network equipment at home or in office spaces. Its 12U height and adjustable galvanized profile rails accommodate devices of various sizes. Fully glass doors provide visibility and a modern appearance. The steel sheet construction up to 1.5 mm thick ensures durability. Easy assembly with step-by-step instructions saves time.
5 528 грн
5 040 грн
The DIGITUS SOHO PRO 19” network cabinet is designed for compact IT installations. With a height of 7U and a depth of 400 mm, it supports efficient space utilization. The perforated steel front door enhances passive airflow. The solid steel construction supports loads of up to 60 kg.
43 грн
118 грн
The Digitus SC/SC duplex fiber optic adapter is designed to connect single-mode OS2 fibers in network infrastructure. It ensures precise centering of optical connectors and stable signal transmission with low loss. The zirconium ceramic alignment sleeve maintains connection accuracy even with repeated connections. The adapter design is convenient for installation in patch panels, junction boxes, and wall outlets.
43 грн
118 грн
The Digitus SC/SC duplex fiber optic adapter is designed to connect OM3 multimode fibers in network infrastructure. It provides a stable optical connection and precise alignment of connectors with minimal signal loss. The zirconium ceramic alignment sleeve maintains connection accuracy even with repeated connections. The adapter's design is convenient for installation in patch panels, junction boxes, and wall outlets.
50 грн
124 грн
The Digitus LC/LC duplex fiber optic adapter is designed to connect single-mode OS2 fibers in network infrastructure. It ensures precise centering of optical connectors and stable signal transmission with low loss. The zirconium ceramic alignment sleeve maintains connection accuracy even after repeated connections. The compact design simplifies installation in patch panels, junction boxes, and wall outlets.
50 грн
124 грн
The Digitus LC/LC duplex fiber optic adapter is designed to connect OM4 multimode fibers in network infrastructure. It ensures precise centering of optical connectors and stable signal transmission with low loss. The zirconium ceramic alignment sleeve maintains connection accuracy even after repeated connections. The compact design simplifies installation in patch panels, junction boxes, and wall outlets.
50 грн
124 грн
The Digitus LC/LC duplex fiber optic adapter is designed for connecting OM3 multimode fibers in network infrastructure. It ensures precise centering of optical connectors and stable signal transmission with low loss. The ceramic alignment sleeve made of zirconium maintains connection accuracy even after repeated connections. The compact design simplifies installation in patch panels, junction boxes, and wall outlets.
7 400 грн
7 400 грн
DIGITUS CAT 5e F-UTP DK-1521-P-305-OD is designed for outdoor network installations. The shielded structure helps reduce signal interference. A 305-meter length supports flexible cable routing without splices. AWG 26/7 conductors provide stable data transmission.
6 600 грн
6 600 грн
DIGITUS DK-1511-P-305-OD is a CAT 5e network cable designed for outdoor installation. The unshielded U-UTP structure suits common networking applications. A 305-meter length allows flexible deployment over long distances. AWG 24/7 conductors support consistent data transmission.
Unterminated patch cords are manufactured and tested according to the specifications ISO/IEC 11801 and DIN EN 50173. They ensure that the installed cable system meets the requirements of the ISO and EN channel specifications, providing optimal performance levels for your cables. Unterminated patch cords are suitable for direct assembly of RJ45 connectors for patch cord production.
