Споживчі товари та електроніка MikroTiK
MikroTik RMK-2/10 rack mounting kit RMK-2/10. The RMK-2/10 allows two smaller MikroTik form factor devices to be mounted in traditional 19" racks, for example, neat and convenient SR-10U. Alternatively, you can remove part of the bracket to mount one 200mm device in a classic 10" rack.
Mount it under the table or put it on the table – like we do it in our testing department. You can even attach a multi-plug extension cord to the back of this sturdy and lightweight aluminium rack. The package includes screws for 10 devices, as well as nuts and screws for mounting the rack itself. While this is not a revolutionary product, we hope it can make the lives of system administrators, engineers, and testers a little bit easier. Compatible with all MikroTik (and other vendor!) devices that would fit in a standard 19” rack. But there’s more! With the small K-79 accessory kit, you can fit up to four RB5009UG+S+IN routers in a single 1U rackmount space or up to 40 routers in total!
The RB4011 wall mount kit is made for protecting your device and it’s ethernet ports from unauthorised access. Made from durable steel, the mount attaches to a wall and allows the ethernet cables to be plugged in, before the router is mounted inside. This means that once the device is secured, there is no easy way to unplug cables, or move the device.
Rackmount ears for RB4011 series, for installing units in standard rack.
The LHG mount is the basic adapter for mast mounting of LHG series access points. Mount MikroTik Simple metallic mount for LHG products. Base bracket for mounting all LHG devices on the mast. Metal design. Full compatibility with LHG series including LHG XL models. Included with Wireless Wire Dish.
12 313 грн
10 066 грн
The MikroTik G1270 is a 750 W open frame power supply designed for high-performance networking equipment such as the CRS354-48P-4S+2Q+RM switch. It supports a wide input voltage range of 90–264 V AC and provides dual outputs: 53 V⎓ 13.5 A and 26.5 V⎓ 27 A.
9 841 грн
7 668 грн
The G1070 power supply is a 500W high-performance adapter designed for use with the MikroTik CRS328-24P-4S+RM. It provides stable and reliable power to ensure uninterrupted network operation. With high efficiency and quality components, it guarantees durability and long-term performance.
Hot-swap 54.5V 10.35A 600W power supply for the CRS320-8P-8B-4S+RM PoE++ switch. The switch comes with a single 600W PSU and an expansion slot for a second PSU that can raise the total power output all the way to 1150 Watts, up to 90 Watts per PoE++ port.
MT48-480095-11DG is 48 V, 0.95 A power supply. It's part of our GPEN concept, that provides all the benefits of GPON but utilizes well-proven, simple and inexpensive Ethernet solutions.
24v 1.2A power supply with straight plug. The cable length is 1.5 meters. The power supply is compatible with MikroTik equipment and other devices that are powered by 24V DC voltage.
2 918 грн
2 278 грн
Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices apart or on top of each other.
3 767 грн
1 559 грн
XQ+BC0003-XS+ is a QSFP28 to 4x SFP28 break-out cable. This addition to the MikroTik 100 Gigabit product line allows you to connect multiple 25 Gigabit devices to your CRS504 or CCR2216. With the integrated SFP28 modules, connecting numerous devices becomes as simple as it gets. The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy.
Direct attach cable that supports not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications. Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications. Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m).
2 070 грн
1 978 грн
A 40/100 Gbps QSFP28 direct attach cable, 1m long. Enables easy direct connectivity between two 100 Gigabit devices. Fairly flexible. Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is one meter long, which should be enough for most setups, but there is also a 3-meter version available. It is fairly flexible – you can keep your devices apart or on top of each other.
The MikroTik 48V2A96W 48V 2A 96W power supply with plug is designed for use with MikroTik products that support 48V output voltage, such as hEX PoE and CRS112-8P-4S-IN.
The MikroTik 48V 1.46A 70W (48POW) power supply is designed to provide equipment manufactured by MikroTiK with a direct current of 48V and a current of 1.46A. The power consumption of the connected device must not exceed 70W.
MikroTik 24HPOW is a powerful 24V 2.5A DC power supply. The device can be used with a Gigabit PoE POE injector to remotely power MikroTik equipment over twisted pair technology using Passive PoE technology.
Mikrotik 18POW - power supply 24 V, 0.8 A, jack 2.1 mm. The power supply is compatible with the entire line of MikroTik RouterBoard routers. It can be used with RBGPOE Gigabit POE Injector.
MikroTik Power Suply 5V, 1A, microUSB for hAP mini, hAP lite, cAP lite MikroTiK 5VPOW
Article:
5VPOW
420 грн
363 грн
MikroTik 5VPOW 5V 1A (microUSB) power adapter is designed for MikroTik hAP mini, hAP lite, cAP lite access points.
5 637 грн
4 080 грн
Hot Swap power supply for CCR1072/2216 and CRS504/CRS518. CCR1072-1G-8S+ and CR2216-1G-12XS-2XQ units are equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over.
±48V Open frame Power supply with 12V 7A output, for CCR since revision r2. ±48 V DC telecom Open Frame Power supply with 12 V 7 A output, for use with Cloud Core Routers since revision "r2" or the new CCR2004-1G-12S+2XS and CRS326-24S+2Q+RM. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for ±48 V installations. Although made specifically for -48V telecom power, the supported input range is from 36V to 57V. Note: To use, positive terminal must be 36 to 57V higher potential than negative terminal (eg. if negative terminal is -48 V, the positive must be -12 to +9 V).
2 571 грн
2 038 грн
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003).